ShinEtsu KS66 Split type Defoamer at a Competitive Price
Nov 6, 2023
Product Name: Defoamer
Item No.: SilibaseDF-KS66
Chemical composition: Polysiloxane compounds containing hydrophobic particles
Active ingredient: 100%
Description:
SilibaseDF-KS66 defoamer is a highly-safe, oil compound type, silicone by SILIBASE SILICONE. It offers excellent defoaming properties. It exhibits low surface tension, chemical stability and heat- & chemical resistance. SilibaseDF-KS66 defoamer is recommended for paints, coatings, inks and printing industry.
Modified Silicone Defoamer KS-66 for Epoxy Floor Coating, Screen Printing Ink, UV ink And Unsaturated Polyester System.
It is a defoamer with 100% solid content and has excellent defoaming and antifoaming properties. It is used for defoaming oil-based systems / solvent-free systems.
Appearance: semitransparent and turbid liquid
Recommended dosage: 0.2-0.5% of the total formula
Performance characteristics
Replacing ShinEtsuK S66, it has excellent defoaming and anti-foaming effects, which can suppress and eliminate the bubbles generated by the slurry during production, stirring, and construction.
Especially suitable for high viscosity or solvent-free systems.
In epoxy coatings, inks, and adhesives, the defoaming speed is fast.
Add Method
Due to its high activity, it can be pre diluted to 10% with aromatic solvents before adding. Due to the tendency of hydrophobic particles to precipitate, it is recommended to use them immediately after dilution.
This product has thixotropy, and its viscosity tends to increase after prolonged exposure or at low temperatures, which is a normal phenomenon. It is recommended to stir it evenly before operation.
Ingredient information:
Polysiloxane compounds containing hydrophobic particles
Application:
Epoxy floor coating, screen printing ink, UV ink, unsaturated polyester system, etc.
Dosage: 0.05~1%. The compatibility of transparent system should be examined. Since the active component is high, it can be diluted to 10% with aliphatic or aromatic solvent in advance and then added. Because hydrophobic particles are easy to precipitate, it is recommended to use them immediately after dilution. This product has thixotropy, and its viscosity tends to rise when it is left for a long time or at low temperature. It is a normal phenomenon. It is recommended to stir it evenly before operation to facilitate use.
